RINV-OP64
The RINV-OP64 is a flanged angular transmission that, combined with a position indicator type “OP”, allows to carry out a visualized adjustment, angular or linear, even if the shaft is in an uncomfortable position.
• Several visualizations and connections possibilities.
• Available with reduction ratios : 1:1 - 1:2.
• Maximum output torque 6 Nm.
• Aluminium case, anodised. Steel shafts. Steel bevel gears, case-hardened.
• Minimum angular backlash, minimum axial backlash.
• Movements on ball-bearings, water-proof.
• Radial load 15 kg - axial load 1,5 kg
• Weigth gr. 300.
Photogallery
| RINV-OP64 |
 |
| A. Antirotation bore Ø4 |
| B. 3 screws M4 at 120° |
| C. Hollow shaft Ø14x15 |
| D. Fixing flange for gearbox |
| EXAMPLES OF MOUNTING POSITIONS | |||
 |
 |
||
 |
 |
||
| The RINV-OP is supplied standard as per overall drawing. To change the mounting position of the two flanges (flange OP and fixing flange RINV-OP), screw-off the two fixing screws, turn the flange in desired position, and fix the two screws. Insert the machine shaft Ø14 into the hollow shaft of the RINV-OP, the anti-rotation lock-pin Ø4 on the fix part of the machine then lock the fixing screws M4 through the bore of the flange. |
|||
Thermoplastic material, steel bush.
| Type |
Dimensions
|
|||
|
D
|
H
|
d1
|
L
|
|
| V.R-80 |
80
|
34
|
ø 10
|
56
|
| V.R-130 |
130
|
50
|
ø 12
|
76
|
| V.R-160 |
160
|
56
|
ø 14
|
86
|
Thermoplastic material, steel bush.
| Type |
Dimensions
|
|||||
|
R
|
H
|
d
|
d1
|
L
|
H1
|
|
| V.M-65 |
65
|
29
|
27
|
ø 10
|
56
|
20
|
| V.M-110 |
110
|
39
|
34
|
ø 12
|
76
|
28
|
| V.M-140 |
140
|
49
|
43
|
ø 14
|
86
|
30
|
With the shaft block flange on the OP2, OP3, OP6, OP7, OP5, OP9 indicator as a compact unity, we obtain a safe blocking of the drive shaft.
Handle in position “a” or “b”.
Block component in anodized aluminium.
▶ Available stainless steel flange in model FL-B OP3, bore ø14.
 |
 |
 |
 |
 |
 |
| FLB-OP2 | FLB-OP3 | FLB-OP6 | FLB-OP7 | FLB-OP5 | FLB-OP9 |
| * bore | |||||
| ø 8 | ø 14 | ø 14 | ø 14 | ø 20 | ø 20 |
| ø 10 | ø 10 | ø 20 | ø 20 | ø 25 | |
| ø 12 | ø 25 | ø 25 | |||
| * other bores with reducing bushes |
|||||
• 4 digits counter (standard red digit indicates decimals; on request 2 red digits for hundredths or 4 black digits for mm). Reading until 9999.Digit height 5 mm
• Shock-proof self-extinguishing technopolymer. Protection IP64. Max. temperature 80°C.
• Reading with inclined 18° or frontal view.
• Standard shaft bore: ø14H7; other bores, smaller than 14 with reducing bush.
➜ for more complete information, see sec. "Hollow shaft position indicators ..." in the drop-down menu on the left.
Photogallery
Richiedi l'accesso
| REPRESENTATION OF REDUCTION & MULTIPLYING RATIO | ||||
| Example | ||||
|
ratio 1:2 ---------------------------------- |
 |
|||
|
‹1› = machine side |
||||
|
The ratio is determined by the shaft ‹1›. |
||||
| RADIAL AND AXIAL LOAD | ||
| Fig. 8 | ||
 |
Fr = max 150 N radial load, is the load acting in perpendicular direction to the shaft/axise | |
|
Fa = max 15 N axial load, is the load acting of the shaft/axis |
||
| T = 4 Nm output torque | ||
|
The loads acting on the shafts can be of two types, referred to the axis of the shaft (Fig. 8): : |
| OUTPUT TORQUE WITH RATIO 1/1 |
| Efficiency = 90% |
| OUTPUT TORQUE WITH RATIO 1/2 |
| Efficiency = 90% |
| OUTPUT TORQUE WITH RATIO 2/1 |
| Efficiency = 90% |
RINV-OP64 
Click here to download >
RINV-OP64 
Click here to download >
RINV-OP64 
Click here to download >