MT MTV MTP-AM14-20-P50/10

Position transducers MT, MTV,MTP, magnetic band P50/10, magnetic rings

The transducers MT, MTV, MTP, the magnetic strip P50/10, the magnetic rings AM14 or AM20 are incremental systems without contact for linear or angular measures. The capacity to measure distances longer than a meter, easy assembling, absence of parts that contact/rub, a waterproof transducer and a water-oil-dust-shaving resistant strip make this system suitable for a large number of applications, while taking position measurements of machinery within industries such as: machine tools, automatic-, wood-, marble-, glassworking machinery, etc.
The measure transducer integrates in the same device, a sensor sensitive to a magnetic field, an electronic signals conversion circuit, and an output circuit. The sensor running on the magnetic strip or on magnetic ring produces a signal which, opportunely amplified and worked out, is changed into an incremental position signal for interfacing with displays, PLC, CNC, axes control, etc.
Shock-proof, self-extinguishing technopolymer grey case for the models MT (horizontal mounting) and MTV (vertical mounting), aluminium case for the model MTP (horizontal mounting).
● Magnetic Band P50/10: the band consists of a magnetized plastic ferrite strip with alternate magnetic poles of 5 mm pitch, carried by a stainless steel strip-band. Mechanical protection of the plastic ferrite strip is supplied by a stainless steel band.
● Magnetic rings: AM14 with bore ø14, AM20 with bore ø20. Supported by an aluminium ring.

 

Photogallery

 MT - MTV 
 
1. 2 fixing bores
 QUOTA POSITIONING   
 MT  MTV
              
 ALLIGNEMENT TOLERANCES

 

MTP
1. 2 fixing slots
QUOTA POSITIONING
ALLIGNEMENT TOLERANCE
 

 

AM14 - AM20 
 
1. Magnetic ring                                                          
2. Sensor MTP 

 

P50/10     END-PIECES
 
1. Sensor side
2. Machine-base
3. Stainless steel strip (mechanical protection)   
4. Plastic ferrite strip  
5. Stainless steel strip (plastic ferrite support)



 

TRANDUCER VERSIONS
FOR HORIZONTAL READING
MT1-MTP1 Supply 10-30 Vdc: out PUSH-PULL
MT2-MTP2 Supply 10-30 Vdc: out TTL LINE-DRIVER 5 Vdc
MT3-MTP3 Supply 5 Vdc: out out TTL LINE-DRIVER 5 Vdc
MT4-MTP4 Supply 10-30 Vdc: out LINE-DRIVER 10-30 Vdc
FOR VERTICAL READING
MTV1 Supply 10-30 Vdc: out PUSH-PULL
MTV2 Supply 10-30 Vdc: out TTL LINE-DRIVER 5 Vdc
MTV3 Supply 5 Vdc: out out TTL LINE-DRIVER 5 Vdc
MTV4 Supply 10-30 Vdc: out LINE-DRIVER 10-30 Vdc

 

TRANSDUCER FEATURES MT-MTV-MTP

Output signals  2 squaring channels,impuls ref. ea 5mm
Output type Push-Pull, max 20mA
Resolution (count x 4) MT-MTV: 0,025 mm; MTP: 0,01 mm
Electrical connection cable ø6,6: 2, 5, 10 meters
Max speed 3 m/s
Accuracy ±0,1 mm/m
Distance transducer/band 0,2 - 2 mm
Protection degree MT, MTV = IP66; MTP = IP67
Working temperature  0 ÷ 50°C
Electromagnetic compatibility  2014/30/EU

 

RING FEATURES AM14/20
Magnet diameter AM14-AM20: ø31
Bore AM14= ø14 - AM20= ø20 
Max speed 1500 rpm
Resolution  2500 impulses/revolution 

 

MAGNETIC BAND P50/10

Length max. 25 metri
Width 10 mm
Thickness 1,7 mm
Bending radius ≥ 7,5 cm
Linear thermal expansion 11 ppm/K
Working temperature -10 ÷ 65C°
SB - MODULAR SUPPORT FOR MAGNETIC BAND  

Modular support in anodized aluminium for P25/10 and P50/10, magnetic band, supplied in standard modules L=500mm; custom lenghts available on request.

1 module of 500mm
3 modules of 500mm

 


 

The P_X positioning units serie are programmable microprocessor single-axis positioner with relay or analogue outputs that processes signals supplied by incremental transducers such as encoders, optical lines, and magnetic band. 
• P1X: the 16-key keypad and 8 operation indicators make operating and setup of the positioners user-friendly. 
• P2X: programming is done very easily by four keys on the front panel; an auxiliary display allows a two character-driven programming in addition to displaying parameters during processing.
 for more complete information, see sec. "Displays, impulse counters, positioning units, ..." in the drop-down menu on the left.  

The F_X series are mono-bidirectional display unit with microprocessor with display, particularly suitable for the measurement of linear and angular dimensions with signals supplied by incremental transducers such as encoder and optical lines, magnetic band, 
• F1X5: mono-bidirectional display unit with microprocessor and six-digit display (reading scale -99999 +999999). 
• F2X: an auxiliary display with two characters enables the guided programming of the display unit. 
• A3X: programmable mono-bidirectional multifunction counter with three axes on 6-digit displays, (reading scale -99999 +999999), ideal solution for all the cases in which it is necessary to display the position on machines with three axes (honing machine, milling machine, etc.). 
 for more complete information, see sec. "Displays, impulse counters, positioning units, ..." in the drop-down menu on the left.  

The F7 is a display unit with integrated or external position sensor, in combination with the P50 magnetic band or AM magnetic ring, is a complete system to measure linear movements.
 F7-E with external sensor 
 F7-I with integrated sensor 
 for more complete information, see sec. "Programmable position indicators..." in the drop-down menu on the left.  

F7P display for panel mounting. Extremely small size with integrated position sensor to be combined with P50 magnetic band or DM30 magnetic ring, offers a complete system for measuring linear and angular displacements. 
Main features: 
• LCD display with digit 7.5mm height, high visibility. 
• Housing in black anodized aluminum, easy installation through two screws on both sides of the instrument.
 for more complete information, see sec. "Programmable position indicators..." in the drop-down menu on the left.  

F8P display for panel mounting. Extremely small size with integrated position sensor to be combined with P50 magnetic band or DM30 magnetic ring, offers a complete system for measuring linear and angular displacements. 
Main features: 
• LCD display with digit 10mm height, high visibility. 
• Housing in black anodized aluminum, easy installation through two screws on both sides of the instrument.
➜ for more complete information, see sec. "Programmable position indicators..." in the drop-down menu on the left.  

Access to Reserved Area

Did you forget your password?


Richiedi l'accesso




*Required replies

MT AM P50 IT  EN 
Click here to download >

MT AM P50 EN  DE 
Click here to download >

MT AM P50 FR  ES 
Click here to download >