Programmable indicator with magnetic ring


Programmable position indicator to be combined with the  mangetic ring AM for rotative measure and integrated serial connection, which is used for linear or angular measurements. It is easy to install for a fast, efficient and safe format changeover.

Main features:
Compact and robust case made of anodized aluminum.
 The display has 7,5mm-high-digits, which allow excellent readability also from a distance. 
3 installation possibilities: version A for horizontal shafts with optimal visibility when positioned at a height between 50cm and 120cm;
version B1 for vertical shafts with optimal visibility between 50cm and 150cm; version B2 for vertical shafts with optimal visibility above 170cm

Main functions:
■ Display with backlight and two rows: the first row shows the current position and the second row shows the target position. The target value is sent to the unit via a serial interface from the PLC, allowing manual format changeover by the operator using a handwheel.
 2 LEDs, 1 green and 1 red, guide the operator until the correct position has been reached
 All parameters are freely programmable via the integrated RS485 interface for networking with the PLC or a remote supervision system. It is possible to use a converter in case a Profinet, EtherNet/IP, or Profibus communication are required.






                                        PROGRAMMABLE INDICATOR «F4RS-AM»            


1. Battery bay
2. Power supply and communication cables


1. Reading sensor







for horizontal shafts, to be positioned at a height between 50cm and 120cm


for vertical shafts, to be positioned at a height between 50cm and 150cm


for vertical shafts, to be positioned above 170cm


For optimal visibility, orient the unit based on the viewing angle as shown in the images
Available functions Reset/preset, absolute/incremental quota, mm/inches/degrees, 3 origins
Battery 3,6V 1/2AA, battery life 6-8 years
Connectors serial port M12T: 4 pole male + 4 pole female M12x1 A cod.
M12Y: 4 pole female x 2 M12x1 A coded
Display Backlit LCD, digit height 7,5 mm
Electromagnetic compatibility - EMC 2014/30/UE
Keyboard 3 programming and functions keys
Power supply 10-30 Vdc 100mA
Power/serial output cable M12T: cable lg 135 mm -
M12Y: cable lg 200 mm
Protection degree display IP54; sensor IP67
Range -99999; 99999
Relative humidity 35-85%
RoHs 2011/65/UE
Rotation maximum speed 1000 rpm
Sensor cable pre-wired and not detachable, length 05 -1 - 3 - 5 meters; material PUR Ø5,5 for mobile laying in cable chains
Serial port RS485 - MODBUS RTU
Working temperature 0-50°C

The transducers MT, MTV, MTP, the magnetic strip P50/10, the magnetic rings AM14 or AM20 are incremental systems without contact for linear or angular measures.
● Transducers MT (horizontal mounting) and MTV (vertical mounting) in shock-proof, self-extinguishing technopolymer; MTP (horizontal mounting) in aluminium case.
● Magnetic Band P50/10: the band consists of a magnetized plastic ferrite strip with alternate magnetic poles of 5 mm pitch, carried by a stainless steel strip-band. Mechanical protection of the plastic ferrite strip is supplied by a stainless steel band.
● Magnetic rings: AM14 with bore ø14, AM20 with bore ø20. Supported by an aluminium ring.
 for more complete information, see sec. "Absolute and incremental systems with magnetic band" in the drop-down menu on the left. 

Protocol converter which connects the EP4_RS and F4RS displays to Profinet, Ethernet/IP, and Powerlink networks.
 Performance increase of the connected displays.
 Fieldbus visualization of the positions reached by the connected devices.
 Real-time diagnostics of the current state of the connected devices.

 for more complete information, see "Gateway..." in the drop-down menu on the left (in the same section). 

Access to Reserved Area

Did you forget your password?

Richiedi l'accesso

*Required replies

Click here to download >

Click here to download >

Click here to download >